|
The Amaircare 4000 VOC CHEM HEPA (4801103) Air Purifier is designed to remove VOC's generated by solvent inkjet plotters. It is installed directly into the rear of a plotter and creates a negative pressure inside the plotter. The VOC's that are created in the printing process are drawn into the 4000VOC's 30 Pounds granulated carbon filters which remove a significant amount of the V.O.C.'s. The 'clean' air is then vented out of the bottom of the 4000 VOC CHEM HEPA (4801103). This works independent of any other system. It can run even if the solvent inkjet plotter is not operating, and is recommended for continuous reduction of V.O.C. levels within the work area.
|
|
|
|
|
|
|
|
|
|
|
|
-
Features: Easy/Change Filters
- Quick access panels allow for quick, easy filter changes
Durable Metal Cabinet
- Greater protection for internal components and filter systems
Highly Efficient
- 30 lbs Of granulated carbon for fast efficient removal of chemicals and odors
Safe
This Amaircare 4000 VOC CHEM HEPA (4801103) Air Purifier can safely be used while people are present. Easy to use, you simply plug it in and turn it on
Rugged
- Solid metal construction, built for years of trouble free operation in the most demanding of environments
Versatile
- The VOC ChemFilter can be used in print shops or anywhere that elevated V.O.C.s, particulate or odors are a problem
Classification
- Portable carbon cir cleaning device
- C.S.A. approved
Materials - 24 Gauge cold rolled steel
Finish
- Powder coated baked enamel
ColorWhite
Intake (Section) - 6" Duct collar enclosure surrounding a two-stage filter assembly
Outflow (Section) - Downdraft vent slots in bottom
Motor/Fan
- Thermally protected class "B" insulated motor
- Designed for continuous operation
- Run tested for 50,000 hr.
- Service: 120 V, 60 Hz or 230 V, 50/60 Hz
Control
- Variable speed
-
Recommended For: Adsorption of chemicals and odors
-
Filtration Types: HEPA
-
Used In: Printer installation
-
Clean Air Delivery Rate: 300 Cu ft/min
-
Filter Configuration: (1) Pre-filter, (1) HEPA filter, (1) Carbon filter, (1) Foam filter
-
Placement: Floor
-
Portability: Wheels
-
Approvals: CSA
-
Construction: 24 Gauge cold rolled steel
-
Finish: Powder coated baked enamel
-
Weight: 55 lbs
-
Available Colors: White
-
Size: 16.00 in Hex x 23.00 in H
-
Fan Speed Control: Variable speed
-
Motor: Thermally protected class "B" insulated motor
-
Average Filter Life: Pre-filter: 1 Yr
V.O.C. Cartridge: 6 Months
-
Fan Speeds in cfm: 300 Cu ft/min
-
Power Requirements: 120 V at 60 Hz, 230 V at 50/60 Hz
-
Power Consumption: 120 W
-
Air Intake: 6 inch duct collar enclosure surrounding a two-stage filter assembly
-
Air Outlet: Downdraft vent slots in bottom
-
Product Shown: in White color
-
Special Features: Wheels
-
 Specifications
Product Overview & Specs
The Amaircare 4000 VOC CHEM HEPA (4801103) Air Purifier is designed to remove VOC's generated by solvent inkjet plotters. It is installed directly into the rear of a plotter and creates a negative pressure inside the plotter. The VOC's that are created in the printing process are drawn into the 4000VOC's 30 Pounds granulated carbon filters which remove a significant amount of the V.O.C.'s. The 'clean' air is then vented out of the bottom of the 4000 VOC CHEM HEPA (4801103). This works independent of any other system. It can run even if the solvent inkjet plotter is not operating, and is recommended for continuous reduction of V.O.C. levels within the work area.
Easy/Change Filters
- Quick access panels allow for quick, easy filter changes
Durable Metal Cabinet
- Greater protection for internal components and filter systems
Highly Efficient
- 30 lbs Of granulated carbon for fast efficient removal of chemicals and odors
Safe
This Amaircare 4000 VOC CHEM HEPA (4801103) Air Purifier can safely be used while people are present. Easy to use, you simply plug it in and turn it on
Rugged
- Solid metal construction, built for years of trouble free operation in the most demanding of environments
Versatile
- The VOC ChemFilter can be used in print shops or anywhere that elevated V.O.C.s, particulate or odors are a problem
Classification
- Portable carbon cir cleaning device
- C.S.A. approved
Materials - 24 Gauge cold rolled steel
Finish
- Powder coated baked enamel
ColorWhite
Intake (Section) - 6" Duct collar enclosure surrounding a two-stage filter assembly
Outflow (Section) - Downdraft vent slots in bottom
Motor/Fan
- Thermally protected class "B" insulated motor
- Designed for continuous operation
- Run tested for 50,000 hr.
- Service: 120 V, 60 Hz or 230 V, 50/60 Hz
Control
- Variable speed
|
|
|
