To link to this article from your blog, copy and paste the url below into your blog or homepage.
Permalink :
The AllerAir Air Medic + D Vocarb Air Purifier features efficient unit for particles that is coupled with an extra deep-bed, VOC blend carbon filter for the treatment of heavy concentrations of volatile organic chemicals, gases and odors. This Air Purifier is offered in black, white, and sandstone colors.
Air Flow and Your AllerAir Air Purifier We've noticed over the years that clients are very particular when it comes to using their AllerAir unit. Some like to run it 24/7, others only at night, some like to run it on high for a few hours then leave it on low for the rest of the day. So is there a science to choosing your air flow rate? We took this question to our technical department and here's what we learned:
Particles: Technically speaking, dust, pollen, hair and other airborne particles actually respond well to a higher setting. That's because the air is drawn-in at a faster rate which make the particles "smack" into the fibrous web of the HEPA filter with greater force. This increases the chance that they'll get stuck in the HEPA. Using the high setting for a few hours may be an excellent "quick fix" strategy if you've just finished brushing your pet or are cleaning out a dusty space, but our technical expert was quick to point out that over the long term it's just as effective to keep your unit on and running on low. This will provide a continuous flow of air that will help keep the air fresh.
Chemicals and Odors: For chemical and odor concerns there is a definite consensus ??? low is the way to go. That's due to the specific nature of the activated carbon used in AllerAir air purifiers. Activated carbon contains millions of tiny pores and fissures that trap chemicals, gases and odors. The longer these pollutants are forced to "hang around" in the carbon bed, the better chance they have of being adsorbed. When you select the low speed, the air passes at a slower rate through the carbon filter, therefore giving the pollutants "dwell" time allowing them to be adsorbed more efficiently. This process is also helped along by AllerAir's deeper carbon beds.
Particles, Chemicals and Odors: For a general improvement in air quality it's best to run the unit continuously on low. This ensures that you always have a constant flow of clean air. If you're concerned about energy costs, you'll be happy to know that most of our residential units draw the same energy as a 40 watt light bulb! That means even with 24-hour use it only costs pennies a day to operate!
Check the box next to an accessory to add it to your order.
The AllerAir Air Medic + D Vocarb Air Purifier features efficient unit for particles that is coupled with an extra deep-bed, VOC blend carbon filter for the treatment of heavy concentrations of volatile organic chemicals, gases and odors. This Air Purifier is offered in black, white, and sandstone colors.
Air Flow and Your AllerAir Air Purifier We've noticed over the years that clients are very particular when it comes to using their AllerAir unit. Some like to run it 24/7, others only at night, some like to run it on high for a few hours then leave it on low for the rest of the day. So is there a science to choosing your air flow rate? We took this question to our technical department and here's what we learned:
Particles: Technically speaking, dust, pollen, hair and other airborne particles actually respond well to a higher setting. That's because the air is drawn-in at a faster rate which make the particles "smack" into the fibrous web of the HEPA filter with greater force. This increases the chance that they'll get stuck in the HEPA. Using the high setting for a few hours may be an excellent "quick fix" strategy if you've just finished brushing your pet or are cleaning out a dusty space, but our technical expert was quick to point out that over the long term it's just as effective to keep your unit on and running on low. This will provide a continuous flow of air that will help keep the air fresh.
Chemicals and Odors: For chemical and odor concerns there is a definite consensus ??? low is the way to go. That's due to the specific nature of the activated carbon used in AllerAir air purifiers. Activated carbon contains millions of tiny pores and fissures that trap chemicals, gases and odors. The longer these pollutants are forced to "hang around" in the carbon bed, the better chance they have of being adsorbed. When you select the low speed, the air passes at a slower rate through the carbon filter, therefore giving the pollutants "dwell" time allowing them to be adsorbed more efficiently. This process is also helped along by AllerAir's deeper carbon beds.
Particles, Chemicals and Odors: For a general improvement in air quality it's best to run the unit continuously on low. This ensures that you always have a constant flow of clean air. If you're concerned about energy costs, you'll be happy to know that most of our residential units draw the same energy as a 40 watt light bulb! That means even with 24-hour use it only costs pennies a day to operate!
Particles coupled with extra deep-bed, VOC blend carbon filter for treatment of heavy concentrations of volatile organic chemicals, gases and odors
For several years, AllerAir has been making high-quality state-of-the-art Air Purifiers. Their goal has been to focus on filtering out harmful impurities other manufacturers of Air Purifiers don't. AllerAir products are used in the most discerning and world renowned institutions such as the Mayo clinic, IBM and the US army.
Warranty
Main Item
10 year manufacturer's warranty on parts and labor
